Raised Access Flooring

 

 

FS-Series

The industry's best seller, the FS-Series panel system, is constructed of a welded structural steel assembly designed to accommodate dynamic loads. Its specially formulated cementitious fill and powder coated epoxy finish give the FS panel a quiet and very solid feel underfoot. Panel systems are available in both 600mm x 600mm and 24" x 24". The FS-Series systems are perfect for use in the following applications:

Computer Rooms
Once factory laminated with a variety of high pressure laminates or VCT, the FS panel is perfect for those heavy rolling loads typically applied to raised flooring in ever changing data centers.

General Office
This panel is extremely quiet, and with its powder coated bare finish and low cost, it is always a great choice for you general office requirements.

Light Industrial
The FS panels perform well under those maximum rolling load conditions. With its variety of different strengths you can achieve ultimate loads of 7000 lbs.

FS-Series Performance Guide
Panel
Application
Ultimate Load lbs (KN)
Concentrated Load at 0.10" (2.53mm) Deflection
Concentrated Load at 0.08" (2.03mm) Deflection
Impact Load lbs (KN)
Rolling Load 10 Pass lbs. (KN)
Rolling Load 10,000 Pass lbs. (KN)
FS100 Light Duty
3300
(14.52 KN)
1000
(4.41 KN)
800
(3.53 KN)
150
(.67 KN)
800
(3.53 KN)
600
(2.64 KN)
FS200 Standard Duty
3800 (16.72 KN)
1250
(5.51 KN)
1000
(4.41 KN)
150
(.67 KN)
1000
(4.41 KN)
800
(3.53 KN)
FS300 Medium Duty
5000 (22.00 KN)
1500 (6.61 KN)
1250 (5.51 KN)
150 (.67 KN)
1250 (5.51 KN)
1000 (4.41 KN)
FS400 Heavy Duty
6000
(26.40 KN)
2000
(8.81 KN)
1500
(6.61 KN)
175
(.78 KN)
1500
(6.61 KN)
1200
(5.29 KN)
FS500 Industrial Duty
7000
(30.80 KN)
2500
(11.01 KN)
2000
(8.81 KN)
200
(.89 KN)
1800
(7.92 KN)
2000
(8.81 KN)

Notes: 10 Pass Rolling Test performed with 3" (75mm) diameter x 1 13/16" (45mm) width caster. 10,000 Pass Rolling Test performed with 6" (150mm) diameter x 1 1/2" (42.5mm) width caster.